Business IT, supplied and supported — project quotes, UK delivery and UK-based support.

Office Wi-Fi that keeps up: planning a business wireless network

9th November 2026
InNetworking

When office Wi-Fi is slow or keeps dropping, the instinct is to buy a more powerful router. It rarely helps. Reliable business Wi-Fi comes from planning coverage and capacity, not from a bigger box in the corner.

Coverage versus capacity

Coverage is whether there is a usable signal everywhere people work. Capacity is whether that signal can serve everyone at once, with dozens of laptops, phones and video calls sharing the same airtime. Most office complaints are capacity problems disguised as coverage problems.

The answer is usually more access points at lower power, spread evenly, rather than one powerful device trying to reach the whole floor.

Start with a survey

Walls, glass, lift shafts, kitchens and neighbouring networks all affect wireless performance. A site survey, whether a predictive design from floor plans or an on-site measurement, shows where access points should go and how many you need. It also gives you a baseline to test against after installation.

Choosing the standard

  • Wi-Fi 6 (802.11ax) handles many devices efficiently and remains a solid baseline.
  • Wi-Fi 6E adds the 6 GHz band, which is far less congested. It makes the biggest difference in busy buildings, provided your laptops support it.
  • Wi-Fi 7 (802.11be) adds wider channels and multi-link operation, where devices use more than one band at once. It is the choice for new installations expected to last several years.

Your access points can only go as fast as your devices allow, so check what your laptops support before paying for the newest standard.

The wired network behind it

Every access point needs a cable back to a switch. Plan for:

  • Cat6 or better cabling, with runs under 100 metres
  • Power over Ethernet (PoE) switches, so access points are powered through the network cable. Check the power budget: newer access points can need PoE+ or higher.
  • Multi-gigabit switch ports for Wi-Fi 6E and Wi-Fi 7 access points, so the cable is not the bottleneck

Security and separation

  • Use WPA3 where devices support it, or WPA2/WPA3 mixed mode during a transition.
  • Put guests on their own network, isolated from company devices and servers using VLANs.
  • Keep printers, cameras and other IoT devices on a separate network segment.
  • For larger teams, consider enterprise authentication (802.1X), so access is tied to individual accounts and removed when someone leaves.

Manage it centrally

Cloud-managed access points and switches let you see every device, push changes across all sites and get alerted when something goes offline. That visibility is what turns "the Wi-Fi is slow" from a mystery into a five-minute diagnosis.

How Greybridge Tech can help

We survey, design and install office Wi-Fi and the switching and cabling behind it, then monitor it so problems are spotted before staff notice. See our networking services or browse networking hardware.

Get the latest IT insights

Expert tips, infrastructure news, and product updates — delivered weekly.

No spam. Unsubscribe any time.

Brands We Supply

Technology from Industry LeadersLeading Vendors, Sourced Through UK Distribution

We supply and support products from the world's leading technology manufacturers, sourced through established UK distribution.

  • Dell
  • HPE
  • Cisco
  • Lenovo
  • Intel
  • Microsoft
  • IBM
  • Ubuntu